OMS Comfort Harness System II with Stainless Steel Back Plate Pre-Strung updated

Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, anda bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness. The Comfort Harness System II is across shoulder harness. This means each side of the upper harness crosses at the top (behind the diver's head), then joins to the lower assemblies on the opposite side. Top left to lower right and top right to lower left. This is a design for superior comfort. The Comfort Harness now incorporates a pull dump tunnel on each shoulder pad. Comfort Harness System II with adjustable Oblique webbing and (4) Chest Mounted D-Rings. Back Plate Features: De-Burred Surfaces Prevent Sharp Edges 1,75lbs in Weight Hard Coat Anodized Surface Slots for Single Cylinder Configuration Harness Features: Cross Shoulder Harness for Increased Comfort 6 Stainless Steel D-Rings 4 are Chest Mount Metal Waist Buckle Crotch Strap Pull Dump Tunnels on each Shoulder Pad Adjustable Oblique Webbing L-XL and fits a person with a 40" to 46" chest